PARCHEM RENDEROC HB40 20KG (DTMR)

Renderoc HB40 is a high build repair mortar for localised repair of reinforced concrete up to 45MPa. Meets the requirements of EN1504-3 Class R3. It can be applied to vertical concrete patches up to 40 mm deep. Suitable for use with Galvashield anode protection systems.

Advantages

•    • Compatible with concrete strength in the range 30 to 45MPa
•    • Abrasion resistant - suitable for aggressive environments
•    • Shrinkage compensated - provides long term dimensional stability
•    • Low permeability to potentially damaging water, CO2 and chloride ions
•    • Suitable for use with Galvashield anodes
•    • Can be applied using wet-spray process - providing faster high build repairs
•    • Pre-bagged to overcome site-batched variations - only the site addition of clean water required
•    • Complies to AS/NZS4020:2005 - suitable for use in potable water

Typical Applications

•    • Vertical & overhead patch repairs
•    • Localised trowel or wet spray application
•    • Up to 1m2 repair area
•    • Trowel build depth between 10-40mm required
•    • Required strength is between 25-40 MPa