DANLEY KEYJOINT STAKES 4PK

Danley™ Keyjoint is a metal joint system which enables loads to be transferred between adjoining slabs while allowing lateral movement and limiting differential deflection. They are self-supporting and height adjustable utilising the Danley™ “drive-n-twist” stake system. Keyjoint formwork can be used as a plain joint and are also compatible with temporary or permanent Rip-A-Strip™ capping profiles (sold separately).

Keyjoint is available in both 3m and 6m lengths standard off the shelf. Keyjoint features knock-out holes for 16mm or 20mm square dowels every 150mm. This provides flexibility in centre spacings at 150mm, 300mm, 450mm and 600mm as standard. The Knock-out holes suit Danley™ Dowelmaster™ sleeves (16mm and 20mm) which provides concrete contractors with a full joint system that includes the dowels, sleeves and the formwork.

Danley™ Keyjoint complies with the requirements of AS 3727.1:2016 Residential Pavements.

Features:

•    •Allows lateral movement between the slabs, but limits differential deflection between the slabs.
•    •Tighter key taper, giving less differential deflection than competing systems.
•    •Allows continuous concrete placement with preformed internal joints.
•    •Incorporates unique “drive-n-twist” stake system to make installation simple.
•    •Knock-outs provide for placement of square dowels (round dowels can also be used if specified).
•    •Ideal for footpaths, shared bikeways and light traffic areas.
•    •Companion capping available for 3mm recess and a 10mm recess
•    •Rip-A-Strip™ permanent capping profiles are available in 2 different colours: Black and Grey.
•    •Danley™ Keyjoint profiles are compatible with 16mm and 20mm Dowelmaster™.
•    •GALVABOND® steel “stay-in-place” formwork system.
•    •Complies with the requirements of AS 3727.1:2016 Residential