SIMPSON FAST CURE CINYLESTER ANCHORING 300ML

Description:

VT-HP® is a high-performance fast cure vinylester resin-based chemical anchor developed for anchoring applications in cracked and non-cracked concrete 20MPa to 50MPa and qualified for use in seismic regions (performance categories C1/C2).

Material:

•    • Vinylester

Base Material:

•    • Normal and Lightweight Concrete (cracked and non-cracked)
•    • Grout-filled and Hollow Concrete Block (when used with screen tubes)
•    • Certain un-reinforced masonry applications

Features & Benefits:

•    • Suitable for use in cracked and non-cracked concrete M8 to M30 / rebar Ø8 to Ø32
•    • Qualified for use in seismic performance categories C1 and C2
•    • Styrene free, low odour for safe use in confined spaces - VOC Compliant (A+ rating)
•    • Excellent for use in cold weather conditions or applications where fast cure is required
•    • Can be used in dry and damp conditions, wet or flooded environments (not sea water)
•    • Fire rated
•    • Fits 300ml standard caulking gun or DT300 by Simpson Strong-Tie, easy to dispense

Installation:

•    • Note: Refer to product label for hole and cartridge preparation, installation and technical data.

Applications:

•    • Structural Steel
•    • Steel Columns and Beams, Post Bases, Concrete Columns
•    • Balcony Extensions
•    • Post-installed rebar applications
•    • Threaded Rod Anchoring
•    • Facades, Safety Barriers
•    • Fences, Gates, Industrial Garage and Warehouse applications

Approvals:

•    • CE 1404 (meets EU safety, health or environmental requirements).
•    • ETA – 19/0419 (Threaded Rod and Rebar Concrete C1)
•    • ETA – 19/0765 (Threaded Rod Masonry C2)
•    • Fire Rated (R120)
•    • WRAS Approved Material (Approved for use with Potable drinking water* approval no. 1811567)