Page 112 - Concrete Handbook 2017
P. 112
CONCRETE REPAIR & TOPPINGS - CEMENTITIOUS
DAYTON THIN RESURFACER 20KG REPAIR MORT
Thin Resurfacer is a multi-purpose single component
repair and resurfacing product designed for use inside
or outside in thicknesses ranging from feather edge
up to ½ in. (1.3 cm). Thin Resurfacer is a polymer
modified, cement based material that can be placed
with a trowel and requires only the addition of water.
Thin Resurfacer sets faster than normal concrete and
will accept foot traffic in approx. 6 to 7 hours.
Code Description
THIN-RESURFACER Dayton Thin Resurfacer 20kg Repair Mort
RENDERROC HB40 RENDERROC FC
High performance, medium weight, Fairing mortar screed, to
very low shrinkage, patch repair cover surface imperfections,
mortar, compatible with concrete polymer modified - (0 mm to
30-45 MPa.Renderoc HB40 exhibits a 3 mm thickness) Renderoc
series of performance characteristics FC cementitious fairing coat
designed to achieve maximum is designed for application in
compatibility with concrete with a thin layers to produce a fair-
compressive strength greater than 30 faced appearance to concrete
MPa. For the reinstatement of large surfaces or masonry surfaces
areas of reinforced concrete where in readiness to receive a
low permeability characteristics are protective/decorative coating.
required and where higher compressive
strength is an important consideration.
Code Description Code Description
302020 Renderoc HB40 20Kg 302000 Renderoc FC 15Kg
RENDERROC HB70 DURAFLOOR LEVELTOP 15KG
High build, high strength, very low Durafloor Leveltop consists of a blend
shrinkage, patch repair mortar, of selected cements and aggregates
compatible with concrete >45 MPa. modified with polymers and flow
For the reinstatement of localised agents. It is used in conjunction with
patch repairs and larger areas Durafloor Level Prime.
where suitable reinforcement is
incorporated. Renderoc HB70 is Durafloor Leveltop is supplied as a
grey powder which requires only the
alkaline in nature and will protect addition of water to produce a self
embedded steel reinforcement. smoothing, free flowing material.
It is specifically designed for
locations where high build and high The product is designed for
compressive strengths are required. installation by hand mixing or a
continuous mixer pump
Code Description Code Description
303030 Renderoc HB70 20Kg 430092 Durafloor Leveltop 15kg
112 1300 659 830 www.formdirect.com.au 113
