Page 132 - Concrete Handbook 2017

CHEMICAL ANCHORS

CHEMSET REO 502 CHEMSET INJECTION 801

Extra heavy duty anchoring of Heavy duty anchoring
reinforcing bar and threaded of threaded studs and
studs into solid concrete and reinforcing bar into solid
stone. Two component, high concrete and stone in
bond strength epoxy adhesive corrosive environments.
specially designed for Two component, chemical
structural connections, such resistant epoxy. Tough and
as reinforcing bar. Suitable for reliable for extra security.
dry, damp, wet and flooded High bond strength for
holes. diamond and carbide drilled
holes. Steel beams and
columns, heavy plant, safety
barriers, reinforcing bars and
bottom plate fixing.

Code Description
Code Description C801C 801 Injection Chemset 380ml
REO502J 502 Injection Chemset 600ml C801J 801 Injection Chemset 750ml

CHEMSET INJECTION 101 INSTALLATION IN SOLID CONCRETE
Please note: Installation varies slightly on each of these three Chemsets.
Medium duty anchoring of Refer to each product for specific instructions.
threaded studs and reinforcing 1. Drill or core hole to specified diameter and depth
bar into solid concrete and 2. Remove dust and debris by brushing and blowing 3 times each
stone, hollow brick and hollow (If hole is wet or flooded, brush only remove water and slurry
concrete block. with wet/dry vacuum)
Versatile, multi-purpose two 3. Screw mixing nozzle onto cartridge and dispense 2-3 trigger pulls
part polyester anchoring of adhesive to waste until colour is light grey with no streaks
system. Fast cure for high 4. Insert tip of nozzle to bottom of hole and dispense adhesive
productivity. Non-drip formula, 5. Fill hole to about 2/3 full
ideal for overhead installation. 6. Insert threaded stud or reinforcing bar with rotating motion to
Steel columns and beams, release trapped air
seating, machinery, facade pins, 7. Wait until adhesive has fully cured before loading
handrails, gates, starter bars, 8. Clean up with acetone
bottom plate fixing.

Code Description
C101C 101 Injection Chemset 380ml
C101J 101 Injection Chemset 750ml

132 1300 659 830 www.formdirect.com.au 133