Adjustable Kicker Formwork Brace

The Adjustable Kicker

The kicker will adjust to various surface angles and establish required height elevations. The precision of the Adjustable Kicker allows for straighter edges and less work than timber bracing.

To increase production in repetitive forming, simply leave the Adjustable Kicker attached to the forms and move from pour to pour. With an available Bracket, the Adjustable Kicker quickly attaches to Steel “C” Purlins as well as curb & gutter forms.

  • Adjustment Positions
  • Straighter Edges
  • Efficency
  • Precise Straight Wall Lines
  • Ideal for Uneven Ground

Bridge Decks

These are one of the Adjustable Kicker's best and most time-saving applications. Simply nail the Kicker to the plywood surface and attach it to the form. Then align the form to the proper position.

Slabs on Grade

The Adjustable Kicker braces to both the top and bottom of the forms, which allows for straighter, more level floors with less work.

Monolithic Pours

A third hole in the base of the Adjustable Kicker allows it to hang over an open footing, and you don't have to worry about removing the pin from the concrete.


Because of its versatility, the Adjustable Kicker makes radius curves faster, easier and more uniform.

High-Rise Buildings

The base plate allows the Adjustable Kicker to move backward and forward while remaining attached to the form and flyer table during high-rise building



As the name implies, the Adjustable Kicker adjusts to various slopes and surface angles. Just release the handle located in the rear of the Kicker, and the base will fall into place.

Repetitive Forming

For repetitive forming, simply leave the Adjustable Kicker attached to the forms and move them from pour to pour

Steel Forms

With an available bracket, the Adjustable Kicker also attaches to steel.

Straight Edges

The precision of the Adjustable Kicker allows time with less work.


The Adjustable Kicker works on any surface including earth, wood, concrete, blacktop or any combination thereof.


Nail Kicker to form and space 2-4 feet apart depending on thickness of concrete.

Release handle [A] and allow base to adjust to the angle of the surface.

On Earth surfaces, drive steel pins through the holes located at front and rear of the Kicker. [B]

On concrete, asphalt or wood surfaces, drive anchors through smaller holes on the Kicker's base. [C]

Establish height, and drive wedges [D] to secure the Kicker to pin.

Position form to proper angle and lock handle down to prevent movement.


Helpful Hints

Always make sure handle is locked before pouring. Check to make sure the wedges are hammered securely in place before pouring.

For repetitive forming, leave the Kickers attached to the form and move from pour.

Availability: In stock

Code Description Qty
200KICKER 200mm Adjustable Kicker
300KICKER 300mm Adjustable Kicker
400KICKER 400mm Adjustable Kicker
ZREBR150 Z Rebate Bracket 150mm Galvanised
ZREBR150W/LIP Z Rebate Bracket 150mm With Lip

Shopping Cart | 0 items

You have no items in your shopping cart.

Quote Requests | 0 items

You have no items in your quote.